Konfigurowanie aplikacji Azure na potrzeby Exchange Online

1. Zaloguj się w portalu Azure jako administrator.
2. Kliknij Cloud Shell Powershell.
3. Jeśli pojawi się taka prośba, utwórz konto magazynu i zaakceptuj ustawienia domyślne.
4. Aby utworzyć aplikację, wpisz to polecenie naciśnij Enter:

   Install-Module Microsoft.Graph -Scope CurrentUser

5. Jeśli pojawi się prośba o zainstalowanie z niezaufanego repozytorium, wpisz Y naciśnij Enter.
6. Skopiuj poniższy blok kodu, wklej go w PowerShell i naciśnij Enter.

   <#
   .SYNOPSIS
   Automates the creation of a Single-Tenant Entra ID App for Workspace Migration.
   Strictly forces account selection and verifies specific Admin roles.
   #>
   
   # Check if the module is missing
   if (-not (Get-Module -ListAvailable -Name Microsoft.Graph.Authentication)) {
       Write-Host "Microsoft Graph module is NOT installed." -ForegroundColor Yellow
       $UserResponse = Read-Host "Would you like to try installing Microsoft Graph? (Y/N)"
   
       if ($UserResponse -ieq "Y") {
           try {
               # Use only native cmdlets, no .NET property setting
               Install-Module -Name Microsoft.Graph -Scope CurrentUser -Force -AllowClobber
               Write-Host "Installation complete!" -ForegroundColor Green
           }
           catch {
               Write-Error "Policy is blocking installation. Please contact IT to install Microsoft.Graph module."
               Read-Host "Press Enter to exit"; exit
           }
       }
       else {
           exit
       }
   } else {
       Write-Host "Microsoft Graph modules detected. Proceeding..." -ForegroundColor Green
   }
   
   # --- STEP 0: THE "DEEP" LOGOUT ---
   Write-Host "Forcing session cleanup..." -ForegroundColor Gray
   Disconnect-MgGraph -ErrorAction SilentlyContinue
   
   # Force clear the local token cache folder if it exists
   $CachePath = "$env:USERPROFILE\.mg"
   if (Test-Path $CachePath) {
       try { Remove-Item $CachePath -Recurse -Force -ErrorAction SilentlyContinue } catch {}
   }
   
   Write-Host "Opening Microsoft Login... (Please select the correct account)" -ForegroundColor Cyan
   
   $RequiredScopes = @(
       "Application.ReadWrite.All",
       "AppRoleAssignment.ReadWrite.All",
       "Directory.Read.All",
       "RoleManagement.Read.Directory"
   )
   
   try {
       # In v2, -ContextScope Process is the most reliable way to force account selection
       # and prevent the session from saving to the machine permanently.
       Connect-MgGraph -Scopes $RequiredScopes -ContextScope Process
   
       $Context = Get-MgContext
       if ($null -eq $Context) { throw "Login was cancelled or failed." }
   
       $UserPrincipal = $Context.Account
       Write-Host "Logged in as: $UserPrincipal" -ForegroundColor Green
   
       # --- ROLE VALIDATION ---
       Write-Host "Verifying Directory Roles..." -ForegroundColor Gray
       $UserRoles = Get-MgUserMemberOf -UserId $Context.Account -All | Where-Object { $_.AdditionalProperties.displayName -ne $null }
       
       $Authorized = $false
       $RequiredRoles = @("Global Administrator", "Privileged Role Administrator")
   
       foreach ($role in $UserRoles) {
           $roleName = $role.AdditionalProperties.displayName
           if ($roleName -in $RequiredRoles) {
               $Authorized = $true
               Write-Host "Access Granted: $roleName" -ForegroundColor Green
               break
           }
       }
   
       if (-not $Authorized) {
           Write-Host "`nCRITICAL ERROR: Insufficient Privileges." -ForegroundColor Red
           Write-Host "Account must be 'Global Administrator' or 'Privileged Role Administrator'." -ForegroundColor Yellow
           Disconnect-MgGraph
           Read-Host "`nPress Enter to exit"; exit
       }
   
   } catch {
       Write-Error "Login failed: $_"
       Read-Host "Press Enter to exit"; exit
   }
   
   # --- USER INPUT ---
   Write-Host "`n--- APPLICATION SETUP ---" -ForegroundColor Cyan
   $InputName = Read-Host "Enter the name for your new Entra ID Application (Default: Workspace Migration App)"
   $AppName = if ([string]::IsNullOrWhiteSpace($InputName)) { "Workspace Migration App" } else { $InputName }
   
   # --- CONFIGURATION ---
   # Updated Map containing all the requested application permissions
   $PermissionMap = @{
       "calendars.read"              = "Calendars.Read"
       "contacts.read"               = "Contacts.Read"
       "directory.read.all"          = "Directory.Read.All"
       "group-conversation.read.all" = "Group-Conversation.Read.All"
       "mail.read"                   = "Mail.Read"
       "mailboxfolder.read.all"      = "MailboxFolder.Read.All"
       "mailboxitem.export.all"      = "MailboxItem.Export.All"
       "mailboxitem.read.all"        = "MailboxItem.Read.All"
       "mailboxsettings.read"        = "MailboxSettings.Read"
       "tasks.read.all"              = "Tasks.Read.All"
       "user.read.all"               = "User.Read.All"
   }
   
   $TenantId = $Context.TenantId
   $GraphAppId = "00000003-0000-0000-c000-000000000000"
   
   try {
       # --- STEP 1: REGISTER APPLICATION ---
       Write-Host "Creating Application: $AppName..." -ForegroundColor Cyan
       $Application = New-MgApplication -BodyParameter @{
           displayName = $AppName
           signInAudience = "AzureADMyOrg"
       }
   
       # --- STEP 2: PREPARE SERVICE PRINCIPAL ---
       $NewServicePrincipal = New-MgServicePrincipal -BodyParameter @{ appId = $Application.AppId }
   
       Write-Host "Waiting 10 seconds for replication..." -ForegroundColor DarkGray
       Start-Sleep -Seconds 10
   
       # --- STEP 3: CONFIGURE & GRANT PERMISSIONS ---
       Write-Host "Configuring API Permissions & Granting Admin Consent..." -ForegroundColor Cyan
       $GraphSP = Get-MgServicePrincipal -Filter "AppId eq '$GraphAppId'" | Select-Object -First 1
   
       $ResourceAccessList = @()
   
       foreach ($key in $PermissionMap.Keys) {
           $RealRoleName = $PermissionMap[$key]
           $Role = $GraphSP.AppRoles | Where-Object { $_.Value -eq $RealRoleName }
   
           if ($Role) {
               $ResourceAccessList += @{ id = $Role.Id; type = "Role" }
   
               New-MgServicePrincipalAppRoleAssignment -ServicePrincipalId $NewServicePrincipal.Id -BodyParameter @{
                   principalId = $NewServicePrincipal.Id
                   resourceId  = $GraphSP.Id
                   appRoleId   = $Role.Id
               } | Out-Null
               Write-Host " - Granted: $RealRoleName" -ForegroundColor Gray
           }
       }
   
       Update-MgApplication -ApplicationId $Application.Id -RequiredResourceAccess @(@{
           resourceAppId  = $GraphAppId
           resourceAccess = $ResourceAccessList
       })
   
       # --- STEP 4: CREATE CLIENT SECRET ---
       Write-Host "Generating Client Secret..." -ForegroundColor Cyan
       $ExpiryDate = (Get-Date).AddYears(2).ToUniversalTime().ToString("yyyy-MM-ddTHH:mm:ssZ")
       $PasswordCred = Add-MgApplicationPassword -ApplicationId $Application.Id -BodyParameter @{
           passwordCredential = @{
               displayName = "MigrationToolSecret"
               endDateTime = $ExpiryDate
           }
       }
   
       # --- OUTPUT ---
       Write-Host "`n-------------------------------------------------------" -ForegroundColor Yellow
       Write-Host "        SETUP COMPLETE - SAVE THESE DETAILS" -ForegroundColor Yellow
       Write-Host "-------------------------------------------------------" -ForegroundColor Yellow
       Write-Host "Application Name        : $AppName"
       Write-Host "Application (Client) ID : $($Application.AppId)"
       Write-Host "Client Secret Value     : $($PasswordCred.SecretText)"
       Write-Host "Directory (Tenant) ID   : $TenantId"
       Write-Warning "IMPORTANT: Copy the Client Secret Value immediately."
   
   }
   catch {
       Write-Error "Operation failed: $_"
   }
   
   # --- FINAL DISCONNECT ---
   Disconnect-MgGraph
   Read-Host "`nPress Enter to close this window"
       

7. Zapisz te dane logowania i przechowuj je w bezpiecznym miejscu. Jeśli dane logowania wyciekną, hakerzy mogą uzyskać dostęp do wszystkich Twoich danych Exchange Online.
   • Tajny klucz klienta
   • Identyfikator aplikacji (klienta)
   • Identyfikator katalogu (najemcy)

1. W systemie Windows utwórz nowy plik w formacie zwykłego tekstu i nadaj mu nazwę migration_app_creator.ps1.
2. Skopiuj poniższy blok kodu, wklej go do nowego pliku i kliknij Run with Powershell (Uruchom za pomocą Powershell).

<#
.SYNOPSIS
Automates the creation of a Single-Tenant Entra ID App for Workspace Migration.
Strictly forces account selection and verifies specific Admin roles.
#>

# Check if the module is missing
if (-not (Get-Module -ListAvailable -Name Microsoft.Graph.Authentication)) {
    Write-Host "Microsoft Graph module is NOT installed." -ForegroundColor Yellow
    $UserResponse = Read-Host "Would you like to try installing Microsoft Graph? (Y/N)"

    if ($UserResponse -ieq "Y") {
        try {
            # Use only native cmdlets, no .NET property setting
            Install-Module -Name Microsoft.Graph -Scope CurrentUser -Force -AllowClobber
            Write-Host "Installation complete!" -ForegroundColor Green
        }
        catch {
            Write-Error "Policy is blocking installation. Please contact IT to install Microsoft.Graph module."
            Read-Host "Press Enter to exit"; exit
        }
    }
    else {
        exit
    }
} else {
    Write-Host "Microsoft Graph modules detected. Proceeding..." -ForegroundColor Green
}

# --- STEP 0: THE "DEEP" LOGOUT ---
Write-Host "Forcing session cleanup..." -ForegroundColor Gray
Disconnect-MgGraph -ErrorAction SilentlyContinue

# Force clear the local token cache folder if it exists
$CachePath = "$env:USERPROFILE\.mg"
if (Test-Path $CachePath) {
    try { Remove-Item $CachePath -Recurse -Force -ErrorAction SilentlyContinue } catch {}
}

Write-Host "Opening Microsoft Login... (Please select the correct account)" -ForegroundColor Cyan

$RequiredScopes = @(
    "Application.ReadWrite.All",
    "AppRoleAssignment.ReadWrite.All",
    "Directory.Read.All",
    "RoleManagement.Read.Directory"
)

try {
    # In v2, -ContextScope Process is the most reliable way to force account selection
    # and prevent the session from saving to the machine permanently.
    Connect-MgGraph -Scopes $RequiredScopes -ContextScope Process

    $Context = Get-MgContext
    if ($null -eq $Context) { throw "Login was cancelled or failed." }

    $UserPrincipal = $Context.Account
    Write-Host "Logged in as: $UserPrincipal" -ForegroundColor Green

    # --- ROLE VALIDATION ---
    Write-Host "Verifying Directory Roles..." -ForegroundColor Gray
    $UserRoles = Get-MgUserMemberOf -UserId $Context.Account -All | Where-Object { $_.AdditionalProperties.displayName -ne $null }

    $Authorized = $false
    $RequiredRoles = @("Global Administrator", "Privileged Role Administrator")

    foreach ($role in $UserRoles) {
        $roleName = $role.AdditionalProperties.displayName
        if ($roleName -in $RequiredRoles) {
            $Authorized = $true
            Write-Host "Access Granted: $roleName" -ForegroundColor Green
            break
        }
    }

    if (-not $Authorized) {
        Write-Host "`nCRITICAL ERROR: Insufficient Privileges." -ForegroundColor Red
        Write-Host "Account must be 'Global Administrator' or 'Privileged Role Administrator'." -ForegroundColor Yellow
        Disconnect-MgGraph
        Read-Host "`nPress Enter to exit"; exit
    }

} catch {
    Write-Error "Login failed: $_"
    Read-Host "Press Enter to exit"; exit
}

# --- USER INPUT ---
Write-Host "`n--- APPLICATION SETUP ---" -ForegroundColor Cyan
$InputName = Read-Host "Enter the name for your new Entra ID Application (Default: Workspace Migration App)"
$AppName = if ([string]::IsNullOrWhiteSpace($InputName)) { "Workspace Migration App" } else { $InputName }

# --- CONFIGURATION ---
# Updated Map containing all the requested application permissions
$PermissionMap = @{
    "calendars.read"              = "Calendars.Read"
    "contacts.read"               = "Contacts.Read"
    "directory.read.all"          = "Directory.Read.All"
    "group-conversation.read.all" = "Group-Conversation.Read.All"
    "mail.read"                   = "Mail.Read"
    "mailboxfolder.read.all"      = "MailboxFolder.Read.All"
    "mailboxitem.export.all"      = "MailboxItem.Export.All"
    "mailboxitem.read.all"        = "MailboxItem.Read.All"
    "mailboxsettings.read"        = "MailboxSettings.Read"
    "tasks.read.all"              = "Tasks.Read.All"
    "user.read.all"               = "User.Read.All"
}

$TenantId = $Context.TenantId
$GraphAppId = "00000003-0000-0000-c000-000000000000"

try {
    # --- STEP 1: REGISTER APPLICATION ---
    Write-Host "Creating Application: $AppName..." -ForegroundColor Cyan
    $Application = New-MgApplication -BodyParameter @{
        displayName = $AppName
        signInAudience = "AzureADMyOrg"
    }

    # --- STEP 2: PREPARE SERVICE PRINCIPAL ---
    $NewServicePrincipal = New-MgServicePrincipal -BodyParameter @{ appId = $Application.AppId }

    Write-Host "Waiting 10 seconds for replication..." -ForegroundColor DarkGray
    Start-Sleep -Seconds 10

    # --- STEP 3: CONFIGURE & GRANT PERMISSIONS ---
    Write-Host "Configuring API Permissions & Granting Admin Consent..." -ForegroundColor Cyan
    $GraphSP = Get-MgServicePrincipal -Filter "AppId eq '$GraphAppId'" | Select-Object -First 1

    $ResourceAccessList = @()

    foreach ($key in $PermissionMap.Keys) {
        $RealRoleName = $PermissionMap[$key]
        $Role = $GraphSP.AppRoles | Where-Object { $_.Value -eq $RealRoleName }

        if ($Role) {
            $ResourceAccessList += @{ id = $Role.Id; type = "Role" }

            New-MgServicePrincipalAppRoleAssignment -ServicePrincipalId $NewServicePrincipal.Id -BodyParameter @{
                principalId = $NewServicePrincipal.Id
                resourceId  = $GraphSP.Id
                appRoleId   = $Role.Id
            } | Out-Null
            Write-Host " - Granted: $RealRoleName" -ForegroundColor Gray
        }
    }

    Update-MgApplication -ApplicationId $Application.Id -RequiredResourceAccess @(@{
        resourceAppId  = $GraphAppId
        resourceAccess = $ResourceAccessList
    })

    # --- STEP 4: CREATE CLIENT SECRET ---
    Write-Host "Generating Client Secret..." -ForegroundColor Cyan
    $ExpiryDate = (Get-Date).AddYears(2).ToUniversalTime().ToString("yyyy-MM-ddTHH:mm:ssZ")
    $PasswordCred = Add-MgApplicationPassword -ApplicationId $Application.Id -BodyParameter @{
        passwordCredential = @{
            displayName = "MigrationToolSecret"
            endDateTime = $ExpiryDate
        }
    }

    # --- OUTPUT ---
    Write-Host "`n-------------------------------------------------------" -ForegroundColor Yellow
    Write-Host "        SETUP COMPLETE - SAVE THESE DETAILS" -ForegroundColor Yellow
    Write-Host "-------------------------------------------------------" -ForegroundColor Yellow
    Write-Host "Application Name        : $AppName"
    Write-Host "Application (Client) ID : $($Application.AppId)"
    Write-Host "Client Secret Value     : $($PasswordCred.SecretText)"
    Write-Host "Directory (Tenant) ID   : $TenantId"
    Write-Warning "IMPORTANT: Copy the Client Secret Value immediately."

}
catch {
    Write-Error "Operation failed: $_"
}

# --- FINAL DISCONNECT ---
Disconnect-MgGraph
Read-Host "`nPress Enter to close this window"

    

3. Zapisz te dane logowania i przechowuj je w bezpiecznym miejscu. Jeśli dane logowania wyciekną, hakerzy mogą uzyskać dostęp do wszystkich Twoich danych Exchange Online.
   • Tajny klucz klienta
   • Identyfikator aplikacji (klienta)
   • Identyfikator katalogu (najemcy)

Ze względów bezpieczeństwa zalecamy zarejestrowanie nowej aplikacji jako jednego najemcy.

1. Zaloguj się w portalu Azure jako administrator.
2. W Azure Services (Usługi Azure) otwórz App registrations (Rejestracje aplikacji).
3. Kliknij New Registration (Nowa rejestracja) i wpisz nazwę aplikacji (np. Advanced import app).
4. W sekcji Supported account types (Obsługiwane typy kont) kliknij Accounts in this organizational directory only (Tylko konta w tym katalogu organizacyjnym), aby utworzyć aplikację dla jednego najemcy.
5. Kliknij Zarejestruj.

Wybierz jedną z tych opcji:

Opcja 1. Ręczne dodawanie uprawnień

1. Z boku w sekcji Zarządzaj kliknij Uprawnienia interfejsu API.
2. Kliknij Add a permission (Dodaj uprawnienie)  Microsoft APIs (Interfejsy API Microsoftu)  Microsoft Graph.
3. W przypadku uprawnień aplikacji wybierz:
   • Calendars.Read
   • Contacts.Read
   • Directory.Read.All
   • Group-Conversation.Read.All
   • Mail.Read
   • MailboxFolder.Read.All
   • MailboxItem.Export.All
   • MailboxItem.Read.All
   • MailboxSettings.Read
   • Tasks.Read.All
   • User.Read.All
4. Kliknij Grant admin consent for (Przyznaj zgodę administratora dla) nazwa organizacji.

Opcja 2. Edytowanie pliku manifestu aplikacji

1. Otwórz plik manifestu aplikacji.
2. Przejdź do “resourceAccess” : [ ] i wybierz opcję:
   • Jeśli “resourceAccess” : [ ] ma już wartość, dodaj przecinek, a następnie wklej ten blok kodu.
   • Jeśli “resourceAccess” : [ ] nie ma wartości, skopiuj i wklej ten blok kodu.

   { "id": "798ee544-9d2d-430c-a058-570e29e34338", "type": "Role" },

   { "id": "089fe4d0-434a-44c5-8827-41ba8a0b17f5", "type": "Role" },

   { "id": "7ab1d382-f21e-4acd-a863-ba3e13f7da61", "type": "Role" },

   { "id": "4f0a8235-6f6f-4ec7-9500-34b452a4a0c3", "type": "Role" },

   { "id": "810c84a8-4a9e-49e6-bf7d-12d183f40d01", "type": "Role" },

   { "id": "99280d24-a782-4793-93cc-0888549957f6", "type": "Role" },

   { "id": "937550e9-33a3-494b-88ae-d9cd394b1fbb", "type": "Role" },

   { "id": "7d9f353d-a7bd-4fbb-822a-26d5dd39a3ce", "type": "Role" },

   { "id": "40f97065-369a-49f4-947c-6a255697ae91", "type": "Role" },

   { "id": "f10e1f91-74ed-437f-a6fd-d6ae88e26c1f", "type": "Role" },

   { "id": "df021288-bdef-4463-88db-98f22de89214", "type": "Role" }

3. Kliknij Grant admin consent for (Przyznaj zgodę administratora dla) nazwa organizacji.

1. Z boku w sekcji Manage (Zarządzaj) kliknij Certificates & secrets (Certyfikaty i obiekty tajne)  New client secret (Nowy tajny klucz klienta).
2. Wpisz opis, wybierz okres ważności i kliknij Dodaj.
3. Skopiuj wartość tajnego klucza klienta i zapisz ją w bezpiecznym miejscu. Wartość jest wyświetlana tylko raz.

Ważne: przechowuj dane logowania do aplikacji w bezpiecznym miejscu. Jeśli dane logowania wyciekną, hakerzy mogą uzyskać dostęp do wszystkich danych Exchange.

Kliknij Overview (Przegląd) i zapisz te dane logowania:

• Identyfikator aplikacji (klienta)
• Identyfikator katalogu (najemcy)