إعداد تطبيق Azure لعملية نقل بيانات متقدّمة

1. بصفتك مشرفًا، سجِّل الدخول إلى "بوابة Azure".
2. انقر على Cloud ShellPowershell.
3. إذا طُلب منك ذلك، أنشئ حسابًا على خدمة التخزين واقبل الإعدادات التلقائية.
4. لإنشاء التطبيق، أدخِل الأمر التالي ثم انقر على Enter:

   Install-Module Microsoft.Graph -Scope CurrentUser

5. إذا ظهرت لك رسالة تطلب منك التثبيت من مستودع غير موثوق به، أدخِل Y ثم انقر على Enter.
6. انسخ مجموعة الرموز التالية وألصِقها في PowerShell، ثم انقر على Enter.

       <#
       .SYNOPSIS
       Automates the creation of a Single-Tenant Entra ID App for Workspace Migration.
       Strictly forces account selection and verifies specific Admin roles.
       #>
   
       # Check if the module is missing
       if (-not (Get-Module -ListAvailable -Name Microsoft.Graph.Authentication)) {
       Write-Host "Microsoft Graph module is NOT installed." -ForegroundColor Yellow
       $UserResponse = Read-Host "Would you like to try installing Microsoft Graph? (Y/N)"
   
       if ($UserResponse -ieq "Y") {
           try {
               # Use only native cmdlets, no .NET property setting
               Install-Module -Name Microsoft.Graph -Scope CurrentUser -Force -AllowClobber
               Write-Host "Installation complete!" -ForegroundColor Green
           }
           catch {
               Write-Error "Policy is blocking installation. Please contact IT to install Microsoft.Graph module."
               Read-Host "Press Enter to exit"; exit
           }
       }
       else {
           exit
       }
       } else {
       Write-Host "Microsoft Graph modules detected. Proceeding..." -ForegroundColor Green
       }
   
       # --- STEP 0: THE "DEEP" LOGOUT ---
       Write-Host "Forcing session cleanup..." -ForegroundColor Gray
       Disconnect-MgGraph -ErrorAction SilentlyContinue
   
       # Force clear the local token cache folder if it exists
       $CachePath = "$env:USERPROFILE\.mg"
       if (Test-Path $CachePath) {
       try { Remove-Item $CachePath -Recurse -Force -ErrorAction SilentlyContinue } catch {}
       }
   
       Write-Host "Opening Microsoft Login... (Please select the correct account)" -ForegroundColor Cyan
   
       $RequiredScopes = @(
       "Application.ReadWrite.All", 
       "AppRoleAssignment.ReadWrite.All", 
       "Directory.Read.All", 
       "RoleManagement.Read.Directory"
       )
   
       try {
       # In v2, -ContextScope Process is the most reliable way to force account selection
       # and prevent the session from saving to the machine permanently.
       Connect-MgGraph -Scopes $RequiredScopes -ContextScope Process
   
        $Context = Get-MgContext
       if ($null -eq $Context) { throw "Login was cancelled or failed." }
   
       $UserPrincipal = $Context.Account
       Write-Host "Logged in as: $UserPrincipal" -ForegroundColor Green
   
       # --- ROLE VALIDATION ---
       Write-Host "Verifying Directory Roles..." -ForegroundColor Gray
       $UserRoles = Get-MgUserMemberOf -UserId $Context.Account -All | Where-Object { $_.AdditionalProperties.displayName -ne $null }
       
       $Authorized = $false
       $RequiredRoles = @("Global Administrator", "Privileged Role Administrator")
   
       foreach ($role in $UserRoles) {
           $roleName = $role.AdditionalProperties.displayName
           if ($roleName -in $RequiredRoles) {
               $Authorized = $true
               Write-Host "Access Granted: $roleName" -ForegroundColor Green
               break
           }
       }
   
       if (-not $Authorized) {
           Write-Host "`nCRITICAL ERROR: Insufficient Privileges." -ForegroundColor Red
   
        Write-Host "Account must be 'Global Administrator' or 'Privileged Role Administrator'." -ForegroundColor Yellow
           Disconnect-MgGraph
           Read-Host "`nPress Enter to exit"; exit
       }
   
       } catch {
       Write-Error "Login failed: $_"
       Read-Host "Press Enter to exit"; exit
       }
   
       # --- USER INPUT ---
       Write-Host "`n--- APPLICATION SETUP ---" -ForegroundColor Cyan
       $InputName = Read-Host "Enter the name for your new Entra ID Application (Default: Workspace Migration App)"
       $AppName = if ([string]::IsNullOrWhiteSpace($InputName)) { "Workspace Migration App" } else { $InputName }
   
       # --- CONFIGURATION ---
       $PermissionMap = @{
       "calendar.read"  = "Calendars.Read"     
       "mail.read"      = "Mail.Read"
       "contacts.read"  = "Contacts.Read"
       "directory.read" = "Directory.Read.All"
       }
   
       $TenantId = $Context.TenantId
       $GraphAppId = "00000003-0000-0000-c000-000000000000"
   
       try {
       # --- STEP 1: REGISTER APPLICATION ---
       Write-Host "Creating Application: $AppName..." -ForegroundColor Cyan
       $Application = New-MgApplication -BodyParameter @{
           displayName = $AppName
           signInAudience = "AzureADMyOrg"
       }
       
       # --- STEP 2: PREPARE SERVICE PRINCIPAL ---
       $NewServicePrincipal = New-MgServicePrincipal -BodyParameter @{ appId = $Application.AppId }
   
       Write-Host "Waiting 10 seconds for replication..." -ForegroundColor DarkGray
       Start-Sleep -Seconds 10
   
       # --- STEP 3: CONFIGURE & GRANT PERMISSIONS ---
       Write-Host "Configuring API Permissions & Granting Admin Consent..." -ForegroundColor Cyan
       $GraphSP = Get-MgServicePrincipal -Filter "AppId eq '$GraphAppId'" | Select-Object -First 1
       
       $ResourceAccessList = @()
   
       foreach ($key in $PermissionMap.Keys) {
           $RealRoleName = $PermissionMap[$key]
           $Role = $GraphSP.AppRoles | Where-Object { $_.Value -eq $RealRoleName }
   
           if ($Role) {
               $ResourceAccessList += @{ id = $Role.Id; type = "Role" }
   
               New-MgServicePrincipalAppRoleAssignment -ServicePrincipalId $NewServicePrincipal.Id -BodyParameter @{
                   principalId = $NewServicePrincipal.Id
                   resourceId  = $GraphSP.Id
                   appRoleId   = $Role.Id
               } | Out-Null
               Write-Host " - Granted: $RealRoleName" -ForegroundColor Gray
           }
       }
   
       Update-MgApplication -ApplicationId $Application.Id -RequiredResourceAccess @(@{
           resourceAppId  = $GraphAppId
           resourceAccess = $ResourceAccessList
       })
   
       # --- STEP 4: CREATE CLIENT SECRET ---
       Write-Host "Generating Client Secret..." -ForegroundColor Cyan
       $ExpiryDate = (Get-Date).AddYears(2).ToUniversalTime().ToString("yyyy-MM-ddTHH:mm:ssZ")
       $PasswordCred = Add-MgApplicationPassword -ApplicationId $Application.Id -BodyParameter @{
           passwordCredential = @{
               displayName = "MigrationToolSecret"
               endDateTime = $ExpiryDate
           }
       }
   
       # --- OUTPUT ---
       Write-Host "`n-------------------------------------------------------" -ForegroundColor Yellow
       Write-Host "        SETUP COMPLETE - SAVE THESE DETAILS" -ForegroundColor Yellow
       Write-Host "-------------------------------------------------------" -ForegroundColor Yellow
       Write-Host "Application Name        : $AppName"
       Write-Host "Application (Client) ID : $($Application.AppId)"
       Write-Host "Client Secret Value     : $($PasswordCred.SecretText)"
       Write-Host "Directory (Tenant) ID   : $TenantId"
       Write-Warning "IMPORTANT: Copy the Client Secret Value immediately."
   
       }
       catch {
       Write-Error "Operation failed: $_"
       }
   
       # --- FINAL DISCONNECT ---
       Disconnect-MgGraph
       Read-Host "`nPress Enter to close this window"
       

7. دوِّن بيانات الاعتماد التالية وخزِّنها بأمان. وفي حال تسريب بيانات الاعتماد، سيتمكن المخترقون من الوصول إلى جميع بيانات Exchange Online.
   • سر العميل
   • معرّف التطبيق (العميل)
   • معرّف الدليل (المستأجر)

1. في نظام التشغيل Windows، أنشئ ملف نص عادي جديدًا وسمِّه migration_app_creator.ps1.
2. انسخ مجموعة الرموز التالية والصِقها في الملف الجديد، ثم انقر على Run with Powershell.

    <#
    .SYNOPSIS
    Automates the creation of a Single-Tenant Entra ID App for Workspace Migration.
    Strictly forces account selection and verifies specific Admin roles.
    #>

    # Check if the module is missing
    if (-not (Get-Module -ListAvailable -Name Microsoft.Graph.Authentication)) {
    Write-Host "Microsoft Graph module is NOT installed." -ForegroundColor Yellow
    $UserResponse = Read-Host "Would you like to try installing Microsoft Graph? (Y/N)"

    if ($UserResponse -ieq "Y") {
        try {
            # Use only native cmdlets, no .NET property setting
            Install-Module -Name Microsoft.Graph -Scope CurrentUser -Force -AllowClobber
            Write-Host "Installation complete!" -ForegroundColor Green
        }
        catch {
            Write-Error "Policy is blocking installation. Please contact IT to install Microsoft.Graph module."
            Read-Host "Press Enter to exit"; exit
        }
    }
    else {
        exit
    }
    } else {
    Write-Host "Microsoft Graph modules detected. Proceeding..." -ForegroundColor Green
    }

    # --- STEP 0: THE "DEEP" LOGOUT ---
    Write-Host "Forcing session cleanup..." -ForegroundColor Gray
    Disconnect-MgGraph -ErrorAction SilentlyContinue

    # Force clear the local token cache folder if it exists
    $CachePath = "$env:USERPROFILE\.mg"
    if (Test-Path $CachePath) {
    try { Remove-Item $CachePath -Recurse -Force -ErrorAction SilentlyContinue } catch {}
    }

    Write-Host "Opening Microsoft Login... (Please select the correct account)" -ForegroundColor Cyan

    $RequiredScopes = @(
    "Application.ReadWrite.All", 
    "AppRoleAssignment.ReadWrite.All", 
    "Directory.Read.All", 
    "RoleManagement.Read.Directory"
    )

    try {
    # In v2, -ContextScope Process is the most reliable way to force account selection
    # and prevent the session from saving to the machine permanently.
    Connect-MgGraph -Scopes $RequiredScopes -ContextScope Process

     $Context = Get-MgContext
    if ($null -eq $Context) { throw "Login was cancelled or failed." }

    $UserPrincipal = $Context.Account
    Write-Host "Logged in as: $UserPrincipal" -ForegroundColor Green

    # --- ROLE VALIDATION ---
    Write-Host "Verifying Directory Roles..." -ForegroundColor Gray
    $UserRoles = Get-MgUserMemberOf -UserId $Context.Account -All | Where-Object { $_.AdditionalProperties.displayName -ne $null }
    
    $Authorized = $false
    $RequiredRoles = @("Global Administrator", "Privileged Role Administrator")

    foreach ($role in $UserRoles) {
        $roleName = $role.AdditionalProperties.displayName
        if ($roleName -in $RequiredRoles) {
            $Authorized = $true
            Write-Host "Access Granted: $roleName" -ForegroundColor Green
            break
        }
    }

    if (-not $Authorized) {
        Write-Host "`nCRITICAL ERROR: Insufficient Privileges." -ForegroundColor Red

     Write-Host "Account must be 'Global Administrator' or 'Privileged Role Administrator'." -ForegroundColor Yellow
        Disconnect-MgGraph
        Read-Host "`nPress Enter to exit"; exit
    }

    } catch {
    Write-Error "Login failed: $_"
    Read-Host "Press Enter to exit"; exit
    }

    # --- USER INPUT ---
    Write-Host "`n--- APPLICATION SETUP ---" -ForegroundColor Cyan
    $InputName = Read-Host "Enter the name for your new Entra ID Application (Default: Workspace Migration App)"
    $AppName = if ([string]::IsNullOrWhiteSpace($InputName)) { "Workspace Migration App" } else { $InputName }

    # --- CONFIGURATION ---
    $PermissionMap = @{
    "calendar.read"  = "Calendars.Read"     
    "mail.read"      = "Mail.Read"
    "contacts.read"  = "Contacts.Read"
    "directory.read" = "Directory.Read.All"
    }

    $TenantId = $Context.TenantId
    $GraphAppId = "00000003-0000-0000-c000-000000000000"

    try {
    # --- STEP 1: REGISTER APPLICATION ---
    Write-Host "Creating Application: $AppName..." -ForegroundColor Cyan
    $Application = New-MgApplication -BodyParameter @{
        displayName = $AppName
        signInAudience = "AzureADMyOrg"
    }
    
    # --- STEP 2: PREPARE SERVICE PRINCIPAL ---
    $NewServicePrincipal = New-MgServicePrincipal -BodyParameter @{ appId = $Application.AppId }

    Write-Host "Waiting 10 seconds for replication..." -ForegroundColor DarkGray
    Start-Sleep -Seconds 10

    # --- STEP 3: CONFIGURE & GRANT PERMISSIONS ---
    Write-Host "Configuring API Permissions & Granting Admin Consent..." -ForegroundColor Cyan
    $GraphSP = Get-MgServicePrincipal -Filter "AppId eq '$GraphAppId'" | Select-Object -First 1
    
    $ResourceAccessList = @()

    foreach ($key in $PermissionMap.Keys) {
        $RealRoleName = $PermissionMap[$key]
        $Role = $GraphSP.AppRoles | Where-Object { $_.Value -eq $RealRoleName }

        if ($Role) {
            $ResourceAccessList += @{ id = $Role.Id; type = "Role" }

            New-MgServicePrincipalAppRoleAssignment -ServicePrincipalId $NewServicePrincipal.Id -BodyParameter @{
                principalId = $NewServicePrincipal.Id
                resourceId  = $GraphSP.Id
                appRoleId   = $Role.Id
            } | Out-Null
            Write-Host " - Granted: $RealRoleName" -ForegroundColor Gray
        }
    }

    Update-MgApplication -ApplicationId $Application.Id -RequiredResourceAccess @(@{
        resourceAppId  = $GraphAppId
        resourceAccess = $ResourceAccessList
    })

    # --- STEP 4: CREATE CLIENT SECRET ---
    Write-Host "Generating Client Secret..." -ForegroundColor Cyan
    $ExpiryDate = (Get-Date).AddYears(2).ToUniversalTime().ToString("yyyy-MM-ddTHH:mm:ssZ")
    $PasswordCred = Add-MgApplicationPassword -ApplicationId $Application.Id -BodyParameter @{
        passwordCredential = @{
            displayName = "MigrationToolSecret"
            endDateTime = $ExpiryDate
        }
    }

    # --- OUTPUT ---
    Write-Host "`n-------------------------------------------------------" -ForegroundColor Yellow
    Write-Host "        SETUP COMPLETE - SAVE THESE DETAILS" -ForegroundColor Yellow
    Write-Host "-------------------------------------------------------" -ForegroundColor Yellow
    Write-Host "Application Name        : $AppName"
    Write-Host "Application (Client) ID : $($Application.AppId)"
    Write-Host "Client Secret Value     : $($PasswordCred.SecretText)"
    Write-Host "Directory (Tenant) ID   : $TenantId"
    Write-Warning "IMPORTANT: Copy the Client Secret Value immediately."

    }
    catch {
    Write-Error "Operation failed: $_"
    }

    # --- FINAL DISCONNECT ---
    Disconnect-MgGraph
    Read-Host "`nPress Enter to close this window"
    

لأسباب تتعلق بالأمان، ننصحك بتسجيل التطبيق الجديد كمستأجر واحد.

1. بصفتك مشرفًا، سجِّل الدخول إلى "بوابة Azure".
2. في Azure Active Directory (Azure AD)، انتقِل إلى تسجيلات التطبيقات.
3. انقر على تسجيل جديد وأدخِل اسمًا لتطبيقك (على سبيل المثال، تطبيق النقل المتقدّم).
4. بالنسبة إلى أنواع الحسابات المتوافقة، انقر على الحسابات في هذا الدليل التنظيمي فقط لإنشاء تطبيق مستأجر واحد.
5. انقر على تسجيل.

حدّد أحد الخيارات التالية:

الخيار 1: إضافة الأذونات يدويًا

1. على الجانب، ضِمن إدارة، انقر على أذونات واجهة برمجة التطبيقات.
2. انقر على إضافة إذنواجهات برمجة تطبيقات MicrosoftMicrosoft Graph.
3. بالنسبة إلى أذونات التطبيق، اختَر:
   • calendars.read
   • mail.read
   • contacts.read
   • Directory.read.all
4. انقر على منح موافقة المشرف إلى مؤسستك.

الخيار 2: تعديل ملف بيان التطبيق

1. افتح بيان التطبيق.
2. انتقِل إلى "resourceAccess" : [ ] وحدِّد أحد الخيارات:
   • إذا كانت السمة “resourceAccess” : [ ] تتضمّن قيمة، أضِف فاصلة ثم الصِق مجموعة الرموز التالية.
   • إذا لم تتضمّن “resourceAccess” : [ ] قيمة، انسخ مجموعة الرموز التالية والصقها.

   { "id": "089fe4d0-434a-44c5-8827-41ba8a0b17f5", "type": "Role" },

   { "id": "810c84a8-4a9e-49e6-bf7d-12d183f40d01", "type": "Role" },

   { "id": "7ab1d382-f21e-4acd-a863-ba3e13f7da61", "type": "Role" },

   { "id": "798ee544-9d2d-430c-a058-570e29e34338", "type": "Role" }

3. انقر على منح موافقة المشرف إلى مؤسستك.

1. في الجانب، ضِمن إدارة (Manage)، انقر على الشهادات والأسرار (Certificates & secrets)سر عميل جديد (New client secret).
2. أدخِل وصفًا واختَر فترة انتهاء صلاحية، ثم انقر على إضافة.
3. انسخ قيمة سر العميل وخزِّنها بأمان. يُرجى العلم أنّ القيمة تعرض مرة واحدة فقط.

ملاحظة مهمة: يجب تخزين بيانات اعتماد التطبيق بأمان. وفي حال تسريب بيانات الاعتماد، سيتمكن المخترقون من الوصول إلى جميع بيانات Exchange.

انقر على نظرة عامة ودوِّن بيانات الاعتماد التالية بأمان:

• معرّف التطبيق (العميل)
• معرّف الدليل (المستأجر)